;
; Configuration file for res_config_ldap
;

; Realtime configuration
; ----------------------
; In order to use this module, you start 
; in extconfig.conf with a configuration like this:
;
; 	sippeers = ldap,"dc=myDomain,dc=myDomainExt",sip
; 	extensions = ldap,"dc=myDomain,dc=myDomainExt",extensions
; 	sip.conf = ldap,"dc=myDomain,dc=myDomainExt",config
;
; In the case of LDAP the last keyword in each line above specifies
; a section in this file.
;
; LDAP schema and ldif files can be located in contrib/scripts.

; TLS support
; -----------
; Note that you can configure an ldaps: url here to get TLS support.
; Detailed configuration of certificates and supported CAs is done in your 
; ldap.conf file for OpenLDAP clients on your system.
; This requires that you have OpenLDAP libraries compiled with TLS support

; *********************************************************************************
; NOTE: res_ldap.conf should be chmod 600 because it contains the plain-text LDAP
;       password to an account with WRITE access to the asterisk configuration. 
; *********************************************************************************

[_general]
;
; Specify one of either host and port OR url.  URL is preferred, as you can
; use more options.
;host=192.168.1.1                    ; LDAP host
;port=389
;url=ldap://ldap3.mydomain.com:3890
;protocol=3                          ; Version of the LDAP protocol to use; default is 3.
;basedn=dc=example,dc=tld            ; Base DN
;user=cn=asterisk,dc=example,dc=tld  ; Bind DN
;pass=MyPassword                     ; Bind password

; Configuration Table
[config]
;
; additionalFilter - This specifies an additional set of criteria to be used
; when querying the LDAP server.
;
additionalFilter=(objectClass=AstConfig)
;
; Attributes mapping (asterisk variable name = ldap attribute name)
; When Asterisk requests the variable by the name of the value on the left,
; this module will look up the attribute listed on the right.
;
filename = AstConfigFilename
category = AstConfigCategory
variable_name = AstConfigVariableName
variable_value = AstConfigVariableValue
cat_metric = AstConfigCategoryMetric
commented = AstConfigCommented

;
; Extensions Table
;
[extensions]
context  =  AstExtensionContext
exten  =  AstExtensionExten
priority = AstExtensionPriority
app = AstExtensionApplication
appdata = AstExtensionApplicationData
additionalFilter=(objectClass=AstExtension)

;
; Sip Users Table
;
[sip]
name = cn       ; We use the "cn" as the default value for name on the line above
                ; because objectClass=AsteriskSIPUser does not include a uid as an allowed field
                ; If your entry combines other objectClasses and uid is available, you may
                ; prefer to change the line to be name = uid, especially if your LDAP entries
                ; contain spaces in the cn field.
                ; You may also find it appropriate to use something completely different.
                ; This is possible by changing the line above to name = AstAccountName (or whatever you
                ; prefer).
                ;
amaflags = AstAccountAMAFlags
callgroup = AstAccountCallGroup
callerid = AstAccountCallerID
directmedia = AstAccountDirectMedia
context = AstAccountContext
dtmfmode = AstAccountDTMFMode
fromuser = AstAccountFromUser
fromdomain = AstAccountFromDomain
fullcontact = AstAccountFullContact
fullcontact = gecos
host = AstAccountHost
insecure = AstAccountInsecure
mailbox = AstAccountMailbox
md5secret = AstAccountRealmedPassword           ; Must be an MD5 hash. Field value can start with
                                                ; {md5} but it is not required.
                                                ; Generate the password via the md5sum command, e.g.
                                                ; echo "my_password" | md5sum
nat = AstAccountNAT
deny = AstAccountDeny
permit = AstAccountPermit
pickupgroup = AstAccountPickupGroup
port = AstAccountPort
qualify = AstAccountQualify
restrictcid = AstAccountRestrictCID
rtptimeout = AstAccountRTPTimeout
rtpholdtimeout = AstAccountRTPHoldTimeout
type = AstAccountType
disallow = AstAccountDisallowedCodec
allow = AstAccountAllowedCodec
MusicOnHold = AstAccountMusicOnHold
regseconds = AstAccountExpirationTimestamp
regcontext = AstAccountRegistrationContext
regexten = AstAccountRegistrationExten
CanCallForward = AstAccountCanCallForward
ipaddr = AstAccountIPAddress
defaultuser = AstAccountDefaultUser
regserver = AstAccountRegistrationServer
lastms = AstAccountLastQualifyMilliseconds
additionalFilter=(objectClass=AsteriskSIPUser)

;
; IAX Users Table
;
[iax]
amaflags = AstAccountAMAFlags
callerid = AstAccountCallerID
context = AstAccountContext
fullcontact = AstAccountFullContact
fullcontact = gecos
host = AstAccountHost
mailbox = AstAccountMailbox
md5secret = AstAccountRealmedPassword           ; Must be an MD5 hash. Field value can start with
                                                ; {md5} but it is not required.
                                                ; Generate the password via the md5sum command, e.g.
                                                ; echo "my_password" | md5sum
deny = AstAccountDeny
permit = AstAccountPermit
port = AstAccountPort
qualify = AstAccountQualify
type = AstAccountType
disallow = AstAccountDisallowedCodec
allow = AstAccountAllowedCodec
regseconds = AstAccountExpirationTimestamp
regcontext = AstAccountRegistrationContext
regexten = AstAccountRegistrationExten
notransfer = AstAccountNoTransfer
lastms = AstAccountLastQualifyMilliseconds
additionalFilter=(objectClass=AstAccountIAX)

;
; A Test Family
;
[testfamily]
MyUSERID = uid
additionalFilter=(objectClass=*)

[accounts]
amaflags = AstAccountAMAFlags
callgroup = AstAccountCallGroup
callerid = AstAccountCallerID
directmedia = AstAccountDirectMedia
context = AstAccountContext
dtmfmode = AstAccountDTMFMode
fromuser = AstAccountFromUser
fromdomain = AstAccountFromDomain
fullcontact = AstAccountFullContact
fullcontact = gecos
host = AstAccountHost
insecure = AstAccountInsecure
mailbox = AstAccountMailbox
md5secret = AstAccountRealmedPassword           ; Must be an MD5 hash. Field value can start with
                                                ; {md5} but it is not required.
                                                ; Generate the password via the md5sum command, e.g.
                                                ; echo "my_password" | md5sum
nat = AstAccountNAT
deny = AstAccountDeny
permit = AstAccountPermit
pickupgroup = AstAccountPickupGroup
port = AstAccountPort
qualify = AstAccountQualify
restrictcid = AstAccountRestrictCID
rtptimeout = AstAccountRTPTimeout
rtpholdtimeout = AstAccountRTPHoldTimeout
type = AstAccountType
disallow = AstAccountDisallowedCodec
allow = AstAccountAllowedCodec
MusicOnHold = AstAccountMusicOnHold
regseconds = AstAccountExpirationTimestamp
regcontext = AstAccountRegistrationContext
regexten = AstAccountRegistrationExten
CanCallForward = AstAccountCanCallForward
additionalFilter=(objectClass=AstAccount)

